Home Kitchen

Installation of wooden countertops

If you are planning to renovate your kitchen, then one of the most important decisions you will have to make is what type of countertop to choose. In fact, the equipment you buy will be a great investment, but if you don’t like it after a year or two, it’s easy to change it. Countertops, on the other hand, are usually installed with the idea that they will last a long time. In this sense, it is very important to find a worktop that is pleasing to the eye and useful.

Solid wood countertops are beautiful, durable, and easy to install, whether you prefer a classic butcher block style, a plank style (wide side of tabletop shown), or a grain edge, you’ll see the many hues color. that come with a natural product. Also, no two pieces of wood have absolutely similar grain structures, which means you have an almost endless variety of grain patterns, even in a small kitchen.

It is very important when placing a wooden countertop to keep in mind that you are working with a piece of malleable material. Unlike granite countertop which will not expand or contract with changing weather conditions, wood will naturally move over the years. In this sense, it is necessary to allow this small movement at the same time that the worktop is secured to the subfloor. This is normally done with a 100% high quality silicone. Don’t cut corners with your glue. You can save a dollar or two per tube by buying a cheap silicone, but it can ultimately cost you a lot more if the bond doesn’t defy time.

Cleaning the surface that the countertop will sit on is the first step when installing the countertop. Rubbing alcohol works well for this because it will remove dirt and also any leftover contamination from the building process. I’m talking about rubbing alcohol here. (Save the brandy for after the workday is over.) Then apply a good line of silicone around all the top edges of the cabinets base which should be about 6mm. Place the countertop directly on the silicone and then give it a very small lateral movement to ensure a good bond. It is essential that the silicone adheres to both surfaces.

Finally, screw the edges of the work through the frame of the cabinets, but be sure to allow for expansion and contraction. Drill a hole in the frame about four times as large as the diameter of the screw to do this. Then apply the screw with a solid washer that keeps the top down but allows for natural shrinkage.

Leave a Reply

Your email address will not be published. Required fields are marked *